SKUBMN-5000
BELLMAN Replacement Seal Kit
![Someware logo in black, shape 1](http://goingsomeware.com/cdn/shop/files/Someware_logos_and_wordmarks_1_{width}x.png?v=1663801596)
- Description
- Specs
- Method
-
GET YOUR OWN SEAL TEAM
Bellman CX-25 Seal Kit, including five silicone seals. Compatible with the Bellman CX-25 stovetop, CX-25P stovetop with pressure gauge and CX-25S Steamer.
PLEASE READ FOR YOUR SAFETY
This kit does not include the o-ring seal for the nut at bottom of the machine.
The bottom o-ring of CX-25 series (CX-25S, CX-25, CX-25P) is very important. The device may explode if the screw is not fixed correctly.
DO NOT REPLACE THE BOTTOM O-RING BY YOURSELF if you don't have proper tools to replace it.
Please pay close attention when replacing the BOTTOM O-RING. Prepare an electronic or air compressing tool to release and lock the nut of the bottom of CX-25 series. Holding the main body tightly, the torque of locking the nut of the bottom of CX-25 series should be 6~8 kgs. Too much torque may damage the screw. The hole at the bottom of CX-25 series is not circle shaped. The shape is for fitting the shaft screw. Please make sure the lines of these two parts are aligned correctly before locking the nut of the bottom of CX-25 series. - This kit includes:
- A seal for the Knob/Handle
- A seal for the lid (flat lid seal)
- Basket Seal
- Basket Reducer Seal
- Internal Rod Holder Seal
- Material: Silicone
- Use to replace the silicone seals on your Bellman CX-25, CX-25P or CX-25S
PLEASE READ FOR YOUR SAFETY
This kit does not include the o-ring seal for the nut at bottom of the machine.
The bottom o-ring of CX-25 series (CX-25S, CX-25, CX-25P) is very important. The device may explode if the screw is not fixed correctly.
DO NOT REPLACE THE BOTTOM O-RING BY YOURSELF if you don't have proper tools to replace it.
Please pay close attention when replacing the BOTTOM O-RING. Prepare an electronic or air compressing tool to release and lock the nut of the bottom of CX-25 series. Holding the main body tightly, the torque of locking the nut of the bottom of CX-25 series should be 6~8 kgs. Too much torque may damage the screw. The hole at the bottom of CX-25 series is not circle shaped. The shape is for fitting the shaft screw. Please make sure the lines of these two parts are aligned correctly before locking the nut of the bottom of CX-25 series.
Our Promise
World-class wares. Carefully selected, thoughtfully delivered.