• Description
• Specs
• Method

• SILICONE SEALS BETTER

  Replace that leaky gasket in the E61 group head of your espresso machine with this neutral and aroma-free silicone gasket. The soft consistency creates a better seal and makes installation even easier. If your portafilter locks into place too far to the right due to a worn group or portafilter, then this is the gasket to make your life easier. This thicker gasket is designed to fit worn groups and/or portafilters in E61 group heads.

• • 8.5mm thicker design matches standard E61 group head gaskets but solves the problem of group/portafilter wear
  • Heat resistant silicone
  • Forms tight seal without tightening the portafilter as much as a standard gasket
  • Fits all espresso machines with E61 group heads that have wear in the group head and/or portafilter
  • 73mm x 57mm x 8.5mm Blue Silicone Gasket
  • Petroleum based grease can degrade silicone. Use a silicone lubricant instead, ideally a food safe white grease.
  • Use the portafilter with the basket removed to install the gasket to avoid breakage

• Use to replace the old gasket on your E61 espresso machine.

  Please note that although the gaskets are strong under compression, you should never use a sharp tool like a screwdriver to install them. This may tear the silicone.

caflatte belman bellmann bell man ballman expresso moka bialetti percolator grosche pylano duna bodum chambord alessi paper filter filter handle gasket