SKUCW-LM-SILI
CAFFEWERKS Silicone La Marzocco Group Gasket (6.0mm)
- Description
- Specs
- Method
-
SILICONE SEALS BETTER
Replace that leaky gasket in the group head of your La Marzocco, Slayer or Mavam espresso machine with this neutral and aroma-free 6.0mm silicone gasket from Caffewerks. The soft consistency creates a better seal and makes installation even easier.
Designated a 6.0mm. Measures at 6.3mm finished. Portafilter lands at 6 o'clock on newer gear. This gasket is measured at two points; where the portafilter basket lands (6.0mm) and the overall measurement (8.0mm) is the cone that sits inside the basket as an additional seal.
-
- 6.0mm conical design and external grooves match standard group head gaskets
- Heat resistant silicone
- Forms tight seal without tightening the portafilter as much as a standard gasket
- 72mm (OD) x 55mm (ID) x 6.35mm (thickness) Red Silicone Gasket
- Petroleum based grease can degrade silicone. Use a silicone lubricant instead, ideally a food safe white grease.
- Use the portafilter with the basket removed to install the gasket to avoid breakage
- Compatibility: La Marzocco, Slayer, Mavam
-
Use to replace the old gasket on your compatible espresso machine.
Please note that although the gaskets are strong under compression, you should never use a sharp tool like a screwdriver to install them. This may tear the silicone.
Our Promise
World-class wares. Carefully selected, thoughtfully delivered.